Raspberry Pi 3 Pre-installed inside Aluminum Housing with Ubuntu OS

Single Raspberry Pi 3 pre-installed inside an aluminum noise resistant case. Designed by WyJen Technologies & RTL-SDR-Wave, this case protects the Raspberry mini-computer from damage and looks great in your modern/designer apartment!  The aluminum housing design houses a custom mother board to bring out four USB ports for your application.  The mother board can be customized for your application.  Two application LEDs are provided on the mother board for use.  Will boot up and ready for use: Internet browsing, gaming, programming, application specific, etc.

One pre-assembled unit comes with the following:

1.  Aluminum Housing with SDR-WAVE logo

2.  Front Plate with four USB ports and HDMI port

3.  Rear Plate with two MCX inputs, one dual LED hole, and 5V/2A jack hole

4.  8 Screws for attaching front and back plates to housing

5.  8 Screws and 4 standoffs for attaching the Raspberry PI +/PI 2 / PI 3 to the mother board

6.  Harness cable with 2 pin 2.54mm connector jack and 2A micro USB connector.  The harness connects the mother board input power via a 2 pin 2.54mm plug to the Raspberry Pi B+/P1 2/Pi 3 power supply.

7.  Two harness cables, each with 5 pin 2.54mm jack and male USB Type A connector to two of USBs on the Raspberry Pi B+/P1 2/Pi 3

8.  Power Supply, 100-240V AC 50/60Hz, Output 5V/2A DC with 2.5*0.7mm Male DC Plug

9.  30cm male HDMI Cable to female HDMI

10.  One Raspberry Pi 3 micro-computer with Ubuntu OS installed